Do you have the same question? Follow this Question
Sep 26, 2017 - 12:00 AM
We’ve provided several answers to questions related to Solid Carbide CNC Spiral O Flute, Aluminum Cutting Up-Cut Router Bits , see some other helpful Q&A related to this product.
Question: Feeds & speeds for 1/8" deep groove in 1/4" aluminum using bit 51377; coolant needed?
Answer: Please find the feed and speed chart for Amana Tool number 51377 in the link below:
https://www.toolstoday.com/pdf/Alumin...
Question: Optimal RPM, feed (IPM) and stepdown for 1/8" (51402) endmill cutting 1.5mm aluminum for mirror finish
Answer: We suggest that you try 80" IPM @ 18,000 RPM with a chip load of 0.005" and a step down of 1.588mm.
If you have any other questions or concerns please contact us at ttsupport@toolstoday.com
Question: Tool 51458: Can I full-slot 3/16" 6061‑T6 in one pass? Recommend feeds/speeds (spindle ≤18k RPM) and for 1/4"?
Answer: With this bit if the material is 3/16" thick you can run the bit at 55" IPM @18,000 RPM
Chip Load Per Tooth: 0.003"
Depth per pass: 3/16"
Ramp Down: 22.5 IPM
If you use 1/4" material you can use the same parameters
Question: Best router bits for milling a 48" straight line in 1" aluminum square tube (wall 1/16–1/8") at production level
Answer: For your application you use Amana Tool router bits number 51470-Z (1/16") and 51474-Z (1/8") which can be found by copying the following links and pasting them to your search bar.
51470-Z: https://toolstoday.com/v-14299-51470-...
51474-Z: https://toolstoday.com/v-14279-51474-...
WARNING!: Never attempt to cut ferrous metals with these bits. Inspect cut quality and adjust feed / speed accordingly.
Note: For optimal results and extended tool life use mist lubricant system or air cooling.
View all Solid Carbide CNC Spiral O Flute, Aluminum Cutting Up-Cut Router Bits Questions & Answers
